811214 Wilson SignalBoost Cellular Amplifier Kit

The included external antenna (301103),  acquires the outside signal and sends it to the amplifier. The signal is then amplified and boosted, and sent through a cable to the Cradle Plus with built-in Antenna for communication with your cell phone and data card. The external antenna communicates with the cell site while the inside antenna communicates with your cell phone and/or data card.

Features:

• Works with all cell phones (except iDEN/Nextel)
• Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE
• Up to 3 watts maximum output power
• Power control logic ensures maximum output power is within cellular standards
• Requires no physical connection to cell phone or data card
• Provides high signal-to-noise ratio
• protects cell sites from harmful interference
• Dual band - Cellular and PCS
• FCC and IC type accepted

Specifications:

Part Number: 811214
Frequency: 824-894 MHz / 1850-1990 MHz
Gain: cell site controlled
Max Output Power: 3 watts (cell site controlled)
Max RF: +35 dBm / +33 dBm
Noise Figure: 3.5 dB nominal
Flatness: ± 2 dB / ± 2 dB
Isolation: > 50 dB uplink/downlink
Power Requirements: 12 V DC, 2 A
Connectors: FME-Male 50 ohms
Dimensions: 5 x 3.5 x 1.2 (inches) 12.7 x 8.9 x 3 (cm)
Weight: 1.03 lbs / 0.468 kg

Applications