GE-MDS 2710 Transceiver Series (SCADA, Remote Control)

GE-MDS 2710 Transceiver Series

Nova Communications #: MDS 2710

Be the first to review this product

Stock Status: In Stock!

The GE MDS Transceiver Series is a price/performance leader in licensed microwave radios in the 220-222 MHz and 220-240 MHz frequency ranges. They provide increased throughput, and longer range for multiple address systems. Transparent and direct asynchronous communication offers real-time communication. No extra software or programming is needed to implement communications using standard asynchronous protocols. A general purpose (unconditioned) digital output is available. The GE MDS Transceiver Series is field configurable as a master station or remote radio. They can operate as a half-duplex or simplex radio. They support all splits in duplex available. Simplex mode permits peer-to-peer radio communications. This product is available for use in Class 1, Division 2, Groups A, B, C & D hazardous locations.
more details>

Return Policy:	20% restocking charge
Availability:	Ships in 5-7 days

Quote Request

OR Add to Compare

Description

Market Applications

Gas/Oil Production and Distribution
Water, Gas and Electric Utilities
Lotteries
Traffic Control
Industrial Process Control
Railroad Communication Systems

MDS Transceiver Series Overview

Why Consider a GE MDS Transceiver Series Solution?

High system performance and data integrity! Through robust construction, digital signal processing technology (DSP) and we offer up to 19.2 kbps data throughput.
Rapid Installation! Quick return on investment due to ease of wireless installation. This licensed radio offers the ability to communicate with any asynchronous protocol without extra software or extra programming.
Performance under the most adverse conditions! Exceptional design provides excellent performance in the face of interference or difficult signal paths.
Network Wide Diagnostics! InSite Network Management software simplifies tasks and reduces the cost of managing the network infrastructure. Provides a non-intrusive means of maintenance and link monitoring.

Features

High Performance - Digital Signal Processing (DSP) Engine
Flexibility - Single Unit Configurable as Master or Remote Radio
Compatibility - Inter-operable Versions Available for use with Existing MDS 2000, MDS 4000 Series Radios

Specifications

General

	MDS 2710A	MDS 2710C	MDS 2710D
Frequency Bands	220 to 240 MHz	220 to 240 MHz	220 to 222 MHz
Freq. Programmability	6.25 kHz increments to any MAS channel pair	12.5 kHz increments to any MAS channel pair	2.5 kHz

Model	Agency Approval	4 Wire Analog	Data Rate	Port Speed	Bit Error Rate	Diagnostics
2710A		Yes	9600 bps (rf)	300 bps-38.4 kbps (data) @ 12.5 kHz Channel Spacing	BER 1x10^-6 @ -110 dBm typical	Network Wide Diagnostic Option
2710C	China	Yes	19,200 bps (rf)	110 bps-38.4 kbps (data) @ 25 kHz Channel Spacing	BER 1x10^-6 @ -105 dBm typical	Network Wide Diagnostic Option
2710D	FCC Part 90	Yes	3200 bps (rf)	300 bps-38.4 kbps (data) @ 5 kHz Channel Spacing	BER 1x10^-6 @ -108 dBm typical	Network Wide Diagnostic Option

For additional agency approval info visit www.microwavedata.com

All Models

Operational Modes:

Async. - Simplex, half-duplex, (synchronous available (9600 bps only) in MDS 4710B, and MDS 9710B)

Data Interface:

RS-232, DB-25 Female Connector Supports: TXD, RXD, RTS, CTS, DCD, RUS, AUX POWER, DSR, and GND

Transmitter

Frequency Stability:

+/- 0.00015% 1.5 ppm

Carrier Power:

0.1 to 5 Watts Programmable

Carrier Power Accuracy:

Normal +/- 1.5 dB

Duty Cycle:

Continuous

Output Impedance:

50 Ohms

Receiver

Type:

Double Conversion Superheterodyne

Frequency Stability:

+/- 0.00015% (1.5 ppm)

Adjacent Channel (EIA):

60 dB nominal

Power Supplies

Primary Power:

Voltage 13.8 Vdc nominal (10.5 to 16 Vdc operating range)

Tx Current:

2A Typical at 5 Watts

Rx Current:

<125 mA

Sleep Mode:

15 mA nominal

Modem / Diagnostics

Modulation:

Digital / CPFSK

CTS Delay:

0-255 msec programmable in 1 msec increments

PTT Delay:

0-255 msec programmable in 1 msec increments

Physical

Case:

Rugged Die Cast Aluminum

Dimensions:

5.08 x 14.29 x 18.4 cm (2.0 x 5.625 x 7.25 inches)

Weight:

1 kg (2.2 lbs)

Environmental

Temperature Range:

-30°C to +60°C (-22°F to +140°F)

Humidity:

95% at 40°C (104°F) non-condensing

Additional Agency Approval

FM/UL/CSA

Approved* (consult factory for country specific approvals)

Configuration Diagrams

Typical MDS MAS Point-to-Multipoint Application

Typical GE MDS Point-to-Multipoint Application with Spread Spectrum Tail-End Link

* The transceiver is not acceptable as a stand-alone unit for use in the hazardous locations described above. It must either be mounted within another piece of equipment, which is certified for hazerdous locations, or installed within guidelines, or conditions of approval, as set forth by approving agencies.

Reviews

Share your knowledge of this product with other customers... Be the first to review this product

Extra Info

Return Policy:	20% restocking charge
Availability:	Ships in 5-7 days

Manufacturer Info

Other products from GE-MDS

Comments

There are currently no product reviews

Write a review on this product!

Extra Info

This product was added to our catalog on Sunday 14 December, 2008.

Notify me of updates to GE-MDS 2710 Transceiver Series

Tell someone you know about this product.

Share your knowledge of this product with other customers... Be the first to review this product

Browse for more products in the same category as the GE-MDS 2710 Transceiver Series

Home » Shop » Wireless Data Products » Data Acquisition (SCADA) » GE-MDS 2710 Transceiver Series

Tags Customers Associate with GE-MDS 2710 Transceiver Series

Add Your Tags (how would you describe the GE-MDS 2710 Transceiver Series in one or two words):

		Add Tags
	Use spaces to separate tags. Use single quotes (') for phrases.