|
Features
* Easy-to-handle, lightweight, compact design.
* Built-in simple voice scrambling for increased privacy.
* VOX ready for handsfree communication- users can focus on the job at hand.
* 5 programmable buttons-enabling easy, one-touch access to up to 10 user-selected features.
* Multi-channel capability-16 channels to support communication amongst all your employees.
* LiIon battery provides up to 11 hours (5/5/90 duty cycle) of battery life at high power to meet the demands of your employee's work shift.
* High-capacity battery option is available for those with longer shift requirements or increased communication needs.
* Rapid-rate drop-in charger. Charges radios in less than 3 hours.
* High power-5 watt(VHF) / 4 watt (UHF)-adjustable power levelshelp extend battery life.
* Repeater capability when increased coverage is required.
* Talkaround capability enabling communication even when a repeater is not being used.
* Tighter specifications: -70 dB adjacent channel selectivity provides enhanced rejection of interference from strong signals on adjacent channels so you can get your message through clearly.
* Wide range of Motorola Original audio, energy and carrying accessories.
Applications
Educational institutions Retail Hospitality Service and Manufacturing Construction
CP185 Radio Specifications
VHF - 136-174 MHz UHF - 435-480 MHz Channel Capacity 16 Channel Spacing 12.5 / 25 kHz switchable Model Numbers AAH03KEF8AA7AN / AAH03RDF8AA7AN FCC ID AZ489FT3822 AZ489FT4883 IC ID 109U-89FT3822 109U-89FT4883 FCC Emissions Designators 11K0F3E 16K0F3E
Dimensions (H x W x L) 4.72 x 2.28 x 1.46 in. (120 x 58 x 37 mm) Weight (with LiIon) 12.34 ounces (350 g) Average Battery Life @ 5-5-90% Duty Cycle1 LiIon battery up to 11 hours NiMH battery up to 10 hours High Capacity LiIon battery up to 16 hours
Transmitter CP185 VHF RF Output 2 to 5W UHF RF Output 2 to 4W Frequency Stability2 ±2.5 ppm Spurs and Harmonics -63dBc (-26dBm @ 5W: -27dBm @ 4W) FM Hum and Noise Ratio2 > 40 dB Modulation Limiting2 (12.5/25 kHz) ≤2.5 kHz / ≤5 kHz Audio Response + 1 to -3 dB Audio Distortion2 < 5%Receiver CP185
VHF / UHF Sensitivity2 (12 dB SINAD) < -119 dBm (.25uV) Adjacent Channel Selectivity2 (12.5/25 kHz) -65 dB / -70 dB Intermodulation2 (12.5/25 kHz) >70 dB Spurious Rejection2 >70 dB Audio Distortion2 < 5% Hum and Noise Radio2 (12.5/25 kHz) > 40 dB Conducted Emission < -57 dBm Audio Output @ <5% Distortion 500 mW (at 24 ohm)Military Standards Applicable MIL-STD 810C 810D 810E 810F
Method Proc./Cat. Method Proc./Cat. Method Proc./Cat. Method Proc./Cat. Low Pressure 500.1 I 500.2 II 500.3 II 500.4 II High Temperature 501.1 I, II 501.2 I/A1, II/A1 501.3 I/A1, II/A1 501.4 I/Hot, II/Hot Low Temperature 502.1 I 502.2 I/C3, II/C1 502.3 I/C3, II/C1 502.4 I/C3, II/C1 Temperature Shock 503.1 - 503.2 I/A1C3 503.3 I/A1C3 503.4 I Solar Radiation 505.1 II 505.2 I 505.3 I 505.4 I Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III Humidity 507.1 II 507.2 II 507.3 II 507.4 - Salt Fog 509.1 - 509.2 - 509.3 - 509.4 - Blowing Dust 510.1 I 510.2 I 510.3 I 510.4 I Blowing Sand - - 510.2 II 510.3 II 510.4 II Vibration 514.2 VIII/F, Curve-W 514.3 I/10, II/3 514.4 I/10, II/3 514.5 I/24 Shock 516.2 I, II 516.3 I, IV 516.4 I, IV 516.5 I, IVEnvironmental Specifi cations Operating Temperature Range -30°C to +60°C (Radio) Water and Dust Intrusion IP54, MIL-STD 15% receive, 5% transmit, 90% standby
2All electrical specifi cations and methods refer to EIA/TIA 603 standards. Specifi cations shown are typical and subject to change without notice.
|